What is BIOS?
BIOS (Basic Input/Output System) is the small program stored on a chip on your motherboard. It is the first thing that runs when you press the power button: it wakes up the hardware, checks that it works, and then hands control to Windows.
What the BIOS actually does
Every time you switch on, the BIOS runs POST, a quick check that the CPU, RAM, graphics and storage are present and responding. If that passes, it looks for a drive with an operating system on it, in the boot order you have set, and starts loading it. The BIOS also holds hardware settings such as fan curves, RAM speed (XMP), virtualisation and which drive boots first. Those settings are kept alive by the CMOS battery when the PC is unplugged.
BIOS vs UEFI
Almost every desktop made in the last ten years uses UEFI, the modern replacement for the old BIOS. UEFI supports large drives, Secure Boot and a mouse-driven menu, which Windows 11 needs. Most people, and most motherboard makers, still call it “the BIOS”, so the two words are used for the same screen.
How to get into the BIOS
Press the setup key repeatedly straight after switching on. On most desktop motherboards it is Delete or F2; some brands use F10, F12 or Esc. On Windows 10 and 11 you can also go to Settings, Recovery, Advanced startup, then Troubleshoot, Advanced options and UEFI Firmware Settings.
When the BIOS is part of the problem
A wrong boot order can make a working PC say “no bootable device”. A failed RAM overclock can stop the PC from posting at all. An interrupted BIOS update, for example from a power trip during the flash, can leave the board unable to start. Clearing the CMOS resets the settings to default and fixes the first two. A corrupted BIOS chip needs reflashing, which some boards can do from a USB stick with a dedicated button.
Common questions
The BIOS starts the hardware when you press the power button, runs a quick self-test called POST, and then finds the drive with Windows on it and starts loading it. It also stores hardware settings such as boot order, fan speeds and RAM speed.
It is usually safe if you use the exact file for your motherboard model from the maker’s website and keep the power stable until it finishes. Only update when there is a reason, such as support for a new CPU or a fix for a known bug, because a failed update can stop the PC from starting.
Inside the BIOS, choose Load Optimised Defaults (often the F9 key) and save. If the PC will not get that far, switch it off at the wall and clear the CMOS with the jumper or button on the motherboard, or remove the coin battery for a few minutes.
More questions? See all common PC questions.