Glossary › PC Repair › Boot Loop
What is a PC Boot Loop?
A PC boot loop is when a computer starts up, gets part of the way, then restarts by itself, again and again, without ever reaching a usable Windows desktop.
Two kinds of boot loop
Where the loop happens tells you a lot. A hardware boot loop happens before Windows: the fans spin up for a few seconds, the PC cuts out, then powers on again, often with no picture at all. This means the PC is failing POST or losing power. A Windows boot loop happens later: you see the motherboard logo or the spinning dots, then a restart, sometimes with a flash of a blue screen or a loop of “Preparing Automatic Repair”.
Common causes
For hardware loops, the usual suspects are a weak or failing power supply, RAM that is loose or faulty, a failed overclock or XMP setting, overheating from a loose CPU cooler, and sometimes a fault in the motherboard. A bad BIOS setting or update can do it too. For Windows loops, common causes are a failed Windows update, a bad driver, corrupted system files, malware, or a failing drive.
Safe first steps
Switch off at the wall and unplug anything you added recently. If you changed BIOS settings, clear the CMOS to reset them. Reseat the RAM, or try one stick at a time. Check that the CPU cooler is firmly mounted and its fan spins. For a Windows loop, let Automatic Repair finish, then try Startup Repair, System Restore, or uninstalling the latest update from the recovery menu. If none of that works and your files matter, stop there: repeated forced restarts on a failing drive can make things worse.
Common questions
Work out where it loops first. If it restarts before the logo, reset the BIOS by clearing CMOS, reseat the RAM and check the power supply. If it loops inside Windows, use the recovery menu to run Startup Repair, System Restore or uninstall the latest update.
Yes. A failing or underpowered PSU can drop out the moment the CPU or graphics card draws power at startup, so the PC switches off and tries again. It is one of the most common causes of a boot loop with no picture on screen.
Yes. Loose, faulty or overclocked RAM is a common reason a PC keeps restarting before it shows anything. Try reseating the sticks, run one stick at a time, and turn off XMP in the BIOS to test.
More questions? See all common PC questions.